How do I get rust stains off my ceramic sink and toilet?
Question:
Answers:
I found a website that is totally dedicated to rust and corrosion and they even have a home section (www.corrosionconnection.com) Here is what I found on the website
To remove rust around the house first look at the surface the rust is on and then determine what you can use on that surface. Can you use steel wool? Heavy duty abrasive cleaning products? Or something less abrasive such as WD-40 or vinegar?
Some common ways to remove rust are to first remove as much as possible with steel wool if that area allows it, and then use either a commercial rust product, or a home-made alternative such as vinegar, vegetable oil, lemon juice or rubbing alcohol. Try to start with the least strong product and move to the harshest commercial product to minimize damage to the area with rust.
I hope this helps
clr and oxiclean
this should remove them
or better yet i use a paste of clorox and a bit of baking soda mixture and let it sit for a few minutes before scrubbing
Comet cleaner.
There are lots of products that do this but they all work best when allowed to sit in place for a while.
In the toilet use a product call "the works" -do not get it on your skin and be careful about putting any bleach products into the toilet until you've rinsed it thoroughly. For the sink ... good old Comet cleanser with a little water usually works well but he CLR works best . also needs to sit a while then scrub ...
try a water filter or softener to keep the heavy minerals out of your water - it's not good to drink that stuff either - bad for the kidneys
Rust Bullet rust inhibitor coating and its patented new technology beats POR 15, Rustoleum and other market leaders in independent laboratory testing. Rust Bullet is guaranteed to stop rust and provide rust prevention for 10 years.
Rust Inhibitor Coating
According to the Thomas Register, the world's leading resource on industrial products and services, there are 319 companies that market rust/corrosion control products.
It takes several months for any rust/corrosion control product to demonstrate its effectiveness. This allows some of these companies to remove their ineffective products from store shelves, change the product name, and place the same product containing the same ingredients, with a different name, back on those same store shelves. Our extensive research has revealed that virtually all rust/corrosion control products contain one or more of six main ingredients.
Try the "works" from Wal-Mart or comet cleanser.
More Related Questions & Answers...