How do you adjust a double glazed door when you cant see any adjusters?
Question:
Answers:
look on the each of the lower corners of the door frame edge you'll see a screw head that activates the adjuster arm on the rollers turn right to raise or left to lower (the adjust. screw may be accessed thru a hole in the frame if it is not readily in sight)
i think Richard may be talking about sliding upvc doors, for side hung doors there is usually a small allan key type grub screw on the hinges turn these in either direction depending how you want to adjust the door. if there really is no adjusters and the door is sticking on the bottom you may need to take the glazing beads off (first removing the black rubber gaskets on the inside) then what we call in the trade TOE & HEEL the door, place a thin wedge between the top of the glazing unit and the underside of the plastic frame on the furtest edge from the hinges, then place a thin wedge under the bottom edge of the glazed unit nearest the hinge, try the door and keep packing it up until it does not drag, refix the beads & then replace the rubber gaskets.
i charge £50.00 to realign doors. it can take me up to an hour to complete because there are so many different factors and designs. if you are in Leeds ill come and fix it. if you do not get it seen to it will get worse in time and the lock will start to stick then the lock will break and cost you a lot more.
if it is a pvc door u will need to remove the beading tht holds the glass in. ui will find wedges in one crner of the glass. u need to put further wedges in t replace bthe door then replace the beading
MOVE
More Related Questions & Answers...