Im having problems with my well at my house?
Question:i'm not getting any water to my house. i need to know if there are any sites that i can go to and find out what the problem might be. if u can help me out that would be great thanks!
Answers:
First, check the power supply to your pump making sure you don't have a tripped breaker or blown fuse if the pump is not running. If the pump is running and no water it could be 2 things. The pump impeller is bad or you have a hole in the line. If you have a submersible pump and the pump is running you probably have a leak in the line down in the well. You will have to pull the line out of the well and check it. If I had more info I can get closer to the root of your problem.
Check your circuit breaker to make sure it has not triped if your pump motor is a 240 volt it should be a double pole 20 or 30 amp breaker if you have fuse's you will need a voltage tester
http://www1.agric.gov.ab.ca/$department/...
This in a web site from Canada that show pretty good details.
It give a range of problems that could cause this problem.
The best advise is to call a professional in your area.
Hi,
Use this Big Savings for your home maitenance and repairs.
It's legitimate.As featured on NBC News Special Edition.Check it out here:
http://clipurl.com/?YZT900
The foot valve at the end of line inside gives a lot of well problems and is least expensive
there could be a couple of problems first check to make sure that the power is on, than check your pressure switch sometimes they have a lever that has to be flipped back,also your pressure tank could of gone bad sometimes the air bladder inside leaks,also you might want to check the wires going to your well water pump outside,they have a tendency of coming loose,you might have to dig around the pump first to find the wires,if they became disconnected than make sure that the power is off before reattaching.turn power back on.
More Related Questions & Answers...