When my toilet is flushed the first time its okay, but the water?
Question:to fill the tank doesn't kick in for about 15 minutes sometimes, most of the time about 8 minutes, so you can never flush it two times in a row. We replaced the float and all parts inside with no success. Any ideas.
Answers:
Turn off the water supply valve to the toilet. Disconnect the supply tube at the valve. Hold a rag over it and turn on and off two or three times. This should clear any obstruction at the valve. If that is not the problem, buy a Fluidmaster 400A fill valve and install it. Easy to do with the included instructions and less than $10.
What I do, is to flush the toilet and then I hold down the handle and let the water rush back into the little bowl and I get a nice big bowl of water.
The plumber told me to do this.
check to make sure your valve is turned all the way on. if it is than you may have a pressure problem coming in to the toilet
It sounds like the angle stop or shut off valve to your toilet has a blockage. What you need to do is to shut off the water to your home and then remove the angle stop/shuttoff and see if there is a blockage. If you don't see anything you probably need to replace the shutoff and supply line coming off of it. I hope this helps.
Hi,
Something to share with you ...
You should refinance your home now because the rates are very low.You can save a lot.
I used "Loan Web" to refinance my home loan.The rate is very low.Their service is really efficient.I got approved in just 2 days.
You can get FREE Quotatios with no obligation here:
http://301url.com/loan_web
More Related Questions & Answers...