How much is the oil to gas ratio for a weedeater?
Question:
Answers:
Mine is 40 parts gas to 1 part oil. I think most are that way...look up your model number on google and you should be able to find it for sure.
i use 1 small very small 2 cycle bottle per gallon of gas
when yu see a bottle of oil on side of the bottle give yu a mazer for it one point a gellon of gas
Several manufacturers make a 2cycle mix that goes in 1 gallon of gas. One mix fits all.
It should say right on the tool. Either on the filler cap or printed on the engine cover.
Also, they make a synthetic 2 cycle oil that is good for all applications, regardless of the mix ratio. I have used it for the last 4 years without problem because my chainsaw, weed eater, and snowblower all use different ratios. The synthetic oil is also smokeless. Ask the guy at the hardware store about it. I bought a large bottle and add 2 oz to each 2 gallons of gas.no matter what I am going to use it in.
40 to 1, gas to oil, as for all two-cycle motors. Exact measurement is unnecessary. If you use a pint jar to mix it, as I do, just barely cover the bottom with oil and fill to the neck with gas. The oil is only there to cool and lubricate the piston, which is why two-cycle motors smoke so much.
mines 50 to 1 ratio
Depends on the manufacturer, some are 16:1,40:1,and 50:1 check the owners manual or the equipment your using some have it on the fill cap or on the pull cord housing.
More Related Questions & Answers...