My first time using a gas powered chainsaw; any suggestions?
Question:As in, do I need to start it at a upward or downward angle and/or any other tips.
Answers:
Most people find it easiest to start with the tip pointing down a bit and making first contact about 2/3 down the blade.
If your cutting large logs use a wedge.
As you get further through the log the top may come together "pinching" the blade. To stop this use a wedge of wood or metal and force it in after the saw.
Good luck and watch your toes!
READ THE INSTRUCTIONS; find them online if you don't have the manual. Don't foget - Gloves, and safety goggles!
Get someone who has used one to show you how they can kick back if you try to cut wood against the grain. It only takes one mistake so don't try it till you watch someone else first.
According the OSHA you are supposed to start a chainsaw with the motor positioned between your legs with the blade at a 90 degree angle away from your legs. If your chainsaw has a chain break make sure it is on before starting the saw. Wear chaps and steel-toed-boots. Just remember to take your time and make sure to use a chainsaw that is the proper size for you (not a saw that is too big)! Good luck, hope this helped!
If it's new the owner's manual will tell you how to start it. If not, put it on the ground, make sure there is nothing near the bar, then put your foot on the bottom part of the handle and pull the starter rope. Be care and good luck.
read this pdf on chainsaw safety first...please!
http://www.redcross.org/pubs/dspubs/chai...
Be aware of the dangers of kickback. Don't use the tip of your saw to cut with, this is where kickback happens and it can fly in your face. Please read the manual as well like the other poster said
These tool are very dangerous
Remember to replace the old gas every year. It gets "stale" and won't start
If it is large enough they are made to start sitting on the ground with one foot through the handle and one hand holding the saw steady. Be carefull about cutting with the tip as kick back can be harzardous. Do not get the moving blade near you or anyone else as flesh yields to steel every time. Hold arm on handle supporting saw rather stiffly to stop kickback and activate chain break on kickback. Cut limbs on downward stroke. Cut branches touching ground that will pinch blade with upward stroke. Do not let chain touch ground as it will dull chain rapidly in the dirt. Get some help from somebody experienced if possible before using. Mix oil and gas ratio properly to prevent saw damage. Keep chain oil reservoir filled when gas is refilled. Kill saw and retighten chain if it begins to sag.
If possible get a bar without a roller tip they don,t kick back as bad
Read the operator's manual, including the maintenance manual. Then, if you still have questions utilize the the 800 number that's found on most powered equipment and call the manufacturers' customer service department or you can take it back to the store that you purchased it from and get safe and true information on how to operate your chan saw smoothly and safely. "Been there and done that" Good luck and more power to ya.
Read the manual very carefully. If you don't have a manual, get one. Or go to your local library and get a book on the subject. There's way too much stuff you need to know to explain here.
read your manual and possibly talk to a neighbor who has used one...
All these answers are good because they all stress safety, but I REALLY want to stress the prudence of enlisting the help of someone who has chainsaw experience. It's a point worth repeating.
More Related Questions & Answers...