Yesterday cut off wire changed by EDF contractors and fridge not working now?


Question:They came yesterday to rewire the cut off wire on the meter. I had almost everything unplug expect for the washer dryer and fridge. I have a switch on the wall that turns the power off from the socket being used for these two appliances. I turned the switch on the wall off and left the fridge plugged in with the socket on. It would have involved a lot of lifting and even then socket for the fridge is in a very awkward position to get to. I have left the fridge on all night and it is not the slightest bit cold. How can I tell if the fridge is broke? Also if the power from the electricity when it was turned back on broke where could I get it fix and more importantly how much would it cost?

Richard

Answers:
Search around. Somepkace is a fuse box or a breaker box. One of the circuits has tripped the breaker or fuse. It should be evident which circuit is bad. Either reset the breakler, or replace the fuse.


the fridge works? The light comes on inside? Use an extension cod and try another outlet. That would be their cost not yours. Besides it would not break the fridge. otherwise that would happen the first time you plugged the fridge in from new. Maybe in their rewiring there is no power to the outlet to the fridge. Otherwise, though I have never seen it on a unit, you need to look for a reset button at the back of the fridge near the motor..

More Related Questions & Answers...
  • Gander with a attitude problem?
  • How do I install a new propane tank for a Kenmore grill?
  • Is it possible to install solar energy system in shady area?
  • What do I need to do to paint a 11 year old shed but it has 3 ft grass around it.?
  • Would you purchase a wooden item (picnic table, bench, chair...) from an amateur carpenter at reduced cost?
  • How many shovel scoops of sand make up a cubic foot?
  • How much should I dilute emulsion to seal new plaster with a first coat?
  • Dryer plug?
  • Hello! I'm on a work site and need lots of high wattage work lights. How can I without blowing a fuse?
  • Can you use PVC glue for plexiglass?
  • This article contents is create by this website user, FindHomeAnswers.com doesn't promise its accuracy.
    Copyright 2007-2008 FindHomeAnswers.com     Contact us    Terms of Use

    Home and Garden