Is it easy to install replacement wwindows?
Question:We need new windows, but was wondering if maybe i can do them myself, instead of paying someone,,
Answers:
No, Hire me to do it. Just kidding. It can be done by anyone with basic carpentry knowledge. I've replaced thousands of them and find that the least intrusive way to replace and old wood window with a new vinyl window is to take them out from the outside. Measuring correctly is very important. measure the area where the sashes currently are leaving approx 1/4" - 3/8" to be able to make them square. Chisel off the outside blindstop holding the sashes in. Pull out the sashes and install the new vinyl window. Make sure to get the window square so that it will operate properly and seal up. Once in place you can rip down some lumber to hold it in from the outside. The new wood can be painted or cladded with Aluminum trim or you can use some vinyl trim instead of wood. By doing it this way you will not disturb the inside trim. After everything is installed make sure to caulk everything real well on the inside and out.
just remember to measure sash to sash.
Absolutely! I say if a contractor can do it, so can a woman (or you, even!)
Construction windows are installed from the outside. Replacement windows, from the inside of the structure. You can buy them at Lowes or Home Depot at considereable savings. Read up on instructions and give one a try... I am doing my basement windows by myself as soon as I can afford them!
When it sounds to easy to do, it usually is. If you don't do it right, they may go in crooked or unsquare, causing them to not open and close properly.
If you want to save some money, buy the windows yourself. Find a reputable contract who will work with you and just install the windows if you do the prep work (remove existing window, clean up opening, clean up debris, help him move the window, reinstall the trim, paint, etc.).
Unless you've do it before, it can be a can-of-worms you'll wish you never opened. Frustration and multiple trial-n-errors will force you to call someone to complete the job.
If you have a reasonable amount of home maintenance and repair skill, replacement windows are not too bad. It really depends more upon your abilities than anything else.
Have a look at http://www.silverlinewindow.com/pdfs/rep... (pdf file).
The link above is to installation instructions for Silverline vinyl replacement windows. I would not recommend Silverline, I have not had good luck with them but the instructions are good and are similar for most brands of replacement windows.
This will give you some idea what is involved so you can decide if it is something you would like to try. I would order one or two windows and try them before you decide to replace the whole house on your own.
yes you can. the only thing you may want help with is measuring the windows for correct fit. putting in new windows takes a good drill with a good screwdriver tip, and a 25 year caulking material. the windows you have now are probably just screwed in. go look. the hardest part is measuring for proper fit.( some window openings can come out of square)
Milgard use to make the easiest window in the world all you had to do was remove the old glass panels from your existing windows and the Milgard window would fit into the existing frame, so if you had stucco or siding you wouldn't have to cut any of that out check into them it might save you some time and money.
Speaking from experience, I can honestly say NO!
Some are easier than others, but none are easy.
As easy as a job seems going in, it seems there is always at least a minor problem which calls for improvisational skills. It may not even have anything to do with the actual installation. Like how am I going to move that big freakin entertainment center.
But honestly though, It does take some experience to recognize the potential problems in various situations (chances are your situation is`nt even considered in previous posts). You could very easily pull a window out of an opening and find for some reason or another that you`ve opened a "Pandora`s Box" Chances are you probably won`t, But there`s always that what if.
I`d suggest enlisting the help of a friend or family member with maybe a little backround in construction to help in your project.
yes measure the inside top of frame side to side, than the middle,than the bottom side to side. ,the smallest measurement is your width, than measure top to bottom on both sides the smaller measurement is you height.the reason for the smaller measurement is so that you can fit the new window in and level it with shims.
More Related Questions & Answers...