'Which site would have the best info on installing Harmonics Laminate Flooring?
Question:I lost the installation sheet, but have a pretty good idea of how it goes in. I just need to have a few specifics on tools and extra material, possibly, do pergo add-ones go with them, etc...
Thanks
Answers:
Wilsonart has a website that has a installation manual to view or download. Laminate is installed basically the same throughout the industry. Leave arpproximatly 3/8 inch exspansion around all walls , Undercut your door jambs for a clean look, make sure the floor is level within and 1/8 inch in a 10ft span or per 10ft span. Most all laminates now are the click together system, most insert by tilting at a 45 angle into the joint and pulling toward yourself as you bring the board down , kneeling on the previous installed floor. Tips, take a few cuts off a board to create 2" x 4" inch pieces of laminate to use as your spacers for your exspansion joint against the walls. Click together a staircase of cut boards as your starter section,usually a 1' , 2' , 3' , 4' size boards then slide that assembled section against the corner of your starting wall. It will give you stability to continue the work. Remember this floor will exspand leave space around all cuts except doorjambs where it will have room underneath the jamb after you undercut it Good luck IM me if you need more assistance.
Go back to the store where you bought the flooring, I'm sure they have extra instruction sheets, especially from their installers.
I agree with Fordman. That would be the first place I'd go; and if they have no clue go to the manufacturer.
Steven Wolf
if you have the box the flooring came in there should be a phone number on it you call them and they will send you new installation
More Related Questions & Answers...