I am looking for a tool than can cut a hole for cabinet lock?
Question:please recommend a unexpensive tool that can get a job done. thanks
Answers:
Try a paddle bit. Not that expensive and very easy to use. Good luck
Find out the hole size you need then down to the hardware store and check if a nest of holesaws has the right size If not get a single hole saw and arbour to do the job. Even better take the lock in and let the expert get the right size
My husband just bought a hole saw from walmart. It has 4 different hole sizes. It was $15.00. It worked wonders running the phone, tv lines through the entertainment center. I believe it is Black & Decker brand.
hole saw
personally i would use a forstner bit of the appropriate size.
What you want is a hole saw; it is a little round saw with teeth that fits into a drill. Ask at Lowes or Home Depot or your local hardware store.
Just get a wood drill bit of the correct dimension. Hole saws tend to be larger than needed for a lock cylinder.
if you're talking about the circular hole to hold the lock, then the appropriately size hole or paddle bit for a drill would be the easiest way. if you dont have a drill, which can be 80 - 200 dollars, you can get a keyhole saw. its a small handsaw used for making, obviously, keyholes.
Go to a home improvement store and ask for a forstner bit the size you need or you can buy them in a set (usually about 8-10 in a set) Whole saw bits are OK but a forstner cuts a bit better and wont wabble near as bad giving you a truer sized hole.
More Related Questions & Answers...