How do I keep from missing a nail with a hammer when I hit it? (Please don't laugh)?
Question:I have to use both hands while holding a hammer and I still keep missing the nail and I can't hit it hard enough to make the nail go into the wood.
Answers:
They make hammers with magnets in the end on top.I use a stilleto but they are pretty pricey. Alot of the framing hammers you buy today have that feature. It will have a groove in the top that holds the nail. Then you can hold it with both hands and give it heck. It will start it for you then continue hitting with both hands.
i'd suggest buying a nail gun but you might be dangerous to yourself and others :)
Same problem here
get a bloke to do it
If you are THAT weak, with THAT poor depth perception, you should just be putting that hammer down. Hire a handyman.
practice, its all you can do. swing slower at first, no need to try to drive the nail all the way down in one swing. you'll get better with practice, like all things... sucks, i know :(
Keep your eye on the nail and not the hammer. Use one hand, it's almost impossible with 2 hands.
Sorry, I did laugh. The way you phrased it was funny.
First move the hammer down to the nail slowly, then a little faster, and then repeat the motion at hammering speed.
Reduce the swing.
Hold closer to the head for better control.
Use a lighter hammer.
practice...and hold the handle of the hammer closer to the head of the hammer until you get good..the further back on the handle you hold it, the less times you will have to hit the nail..but you will miss if you aren't steady with it
"Choke up" on the hammer a little bit. Holding the hammer closer to the head will increase your accuracy, but it will also reduce the power that you generate. Also, if you're worried about damaging whatever you're working on, practice on some scrap for a while until you feel comfortable.
you hold the nail with a clothes peg and hold it with your hand and then hit it with the hammer.
Hold the nail with one hand and the hammer with the other. Don't hold the hammer close to the head. Take a big swing and hit the nail. Don't be afraid.
practice makes perfect but some people just are not good at it. I use a hammer all the time but now and then i miss to. Good Luck :)
Well first of all don't hold the hammer with two hands.
-Grasp the hammer in your dominate hand near the end of the handle.
-Start the nail by gently tapping while holding the nail
-Using you wrist and elbow strike the nail
-Practice, Practice Practice
p.s. wear safety glasses and keep your eyes open.
It is harder to hit a nail using two hands. You could try a lighter hammer - but lighter hammers don't have the momentum to drive a larger nail. You can also try choking up on the hammer (moving your hand toward the head). Get a good swing at it, but don't swing your whole arm, just from your elbow. Imagine your forearm is an extension of the tool's handle. Then practice, practice, practice.
You can try a lighter hammer so you don't need to use both hands. Also, you may not be able to hit a nail at all. Seriously, you may not have the hand / eye coordination. Before I went to design school, I thought everyone could cut on a drawn line. The first day of class, the first thing we did was cut on a straight, squiggly and zig zag line. Seven people were told they couldn't go through the program and they were given their money back because they couldn't cut on the line.
pre-drill a hole for the nail (or screw). The hole should be slightly smaller then the nail (or screw). This should make it easier to get the job done. It is more difficult to swing a regular hammer with 2 hands. Practice with one hand, a pre-drilled hole should help make it easier.
you what i call lighting you never hit in the same place twice just hold the hammer Handel from the end where you supposed to crab it not from the middle or on the other end and just keep practicing on a scrap piece of wood and hammer away good luck
P.S get a man to do it for you
hold the hammer with your right hand. hold/ press the wood with your left, making sure the wood to stay where it is. try to move the hammer slowly to the nail (in slow swinging motion) 2 times. then hit hard in the exactly same motion. it's odd if you missed it.
Your a young lady.You should know somebody that can help you with your problem. If you don't know what you are doing, it can be dangerous for you or anyone around you at the time. You can hit the nail wrong and it can fly across the room. I suggest you practice with Small hits, and work your way to harder hits...Or you can use liquid nails..
Good Luck....
1) First off make sure that you are not trying to hammer in a screw.
2) Maybe the hammer you are using is to small.
3) If all else fails then have someone do it for you.
I'm an electrician and therefore do this every day: where a glove on your hand that u r holding the nail with (so it doesn't hurt as bad), hold the hammer near the end of its grip, (away from the head of the hammer) lock your wrist that u r holding the hammer with in a position u feel comfortable. Tap the nail whilst holding it, until it can holding its own weight, then when it can remove ur hand and hit it as hard as u feel necessary. Do not use your wrist to move the hammer use your forearm, only practise can make u not miss... -And make sure u r using the correct hammer for the job ie a 16 ounce Claw Hammer not a 32ounce Lump hammer
More Related Questions & Answers...