Power washers,why is water pouring out of the trigger area,?
Question:You might say, you have a loose connection, but we have only used it a few times and it has never done this before. There does not seem to be anything to tighten anyway. I thought the water was up too fast but still the same. even with the machine turned off the water is still pouring only stops when the tap is turned off. I can't find my instruction maual.
Answers:
You have dropped the handle and broken it, time for a new handle and be careful this time. The cheap they are the easier they break.
If by water, you mean faeces, and by trigger-area, you mean anus, I would say you had diarrhoea.
undo it ...it propably just needs a new washer...they are supplied with very thin ones ..
Perhaps the seal has deteriorated and needs replacing, if it is still under guarantee contact the manufacturer.
if your connections are all secure,the only thing i can think of is either the seal has gone,or you have dropped the handle and got a crack in it? i suggest you look to see if you have a crack in it,before starting to dismantle?
New o rings seals required in the handle ,ring the makers and they will tell you what size you need .
My darling its the washer or the spring , replace both and all will be ticketyboo.
ta ta xxx
More Related Questions & Answers...