How do I paint white wicker furniture a differant color?
Question:
Answers:
First it must be cleaned thoroughly or any paint will not adhere to it. After cleaning it and letting it dry, choose a good oil base primer. Primer is very important for any paint job. It will save you time and money in the long run. After the primer has dried for at least 12 hours you may paint any colour you want. If the furniture is to be left outdoors I would use an outdoor paint that would be used to paint the house. The sky is the limit with your choices. If you don't want paint on your lawn or any other surfaces lay a couple of layers of drop sheets down first.
With all the surfaces, spray paint works the best. Make sure the funiture is clean first and then go to town with the spray cans or, if you are doing more than once piece, you might want to rent a sprayer at the rental store.
Remember, don't over apply or else you end up with runs and drips. Two light coats far better than one heavy coat.
get one of those air less spray guns work great first coat is a primer flat paint then semi or gloss luck
Use a spray hose or put the stuff in your shower and get is clean. After it is completely dry use flat finish spray paint, giving each piece several light coats until you are satisfied with the look. Good Luck.
Hi, you have to thoroughly wash it using soap and water, and a brush. Allow it to dry and then spray paint it. if you don't want to use a can of spray paint, you can rent a paint sprayer. Be sure to protect the area underneath and around when you spray paint because it does spread. To do this, build an area using boxes or plastic.
theres a special spraypaint for it if you go to your local hardware store and tell them your problem the'll show it to you.
More Related Questions & Answers...