Can not level my washing machine I followed all instructions on how?
Question:
Answers:
Leveling items with four feet can be a little tricky.
I presume you have a carpenter's level, so try leveling it corner-to-corner (place level at 45 degree angle on the top of the machine). Once that axis is leveled, then place the level on the other 45 degree axis (i.e. pointing at the other two corners) and level those two. Be careful not to over-do the leveling as then you have the machine rocking on those feet and you'll have to go back to the first two corners.
If you have all the feet screwed out as far as they can go, you'll need to lower them all and start over.
Its pretty easy to do. The adjustments to level are done with the little screwing feet at the bottom of the washing machine is where you begin. Twisting either left or right will bring the feet up or down. I like to start with the screws in just enough to get my fingers underneath ,this assure me that I won't unscrew the feet from the machine. Using a carpenter's level, positioned in the center of the washer, from front to back, to make sure the front and back are level with one another. Then, use the level so that is goes across the machine working with the right and left sides of the machine, making sure that bubble is centered in the middle. The final thing I like to do just for good measure is to give the dasher a good bob and shake, that usually does the job for our household giants.
More Related Questions & Answers...