How do i get my bra underwire out from behind the wahing machine drum? it went through one of the holes!!?
Question:does anyone know if i can get it out without dismantling the washing machine? its making a terrible noise when i do the washing now...not to mention the other side effect of not having it in my bra...
Answers:
i would just take a panel off the washing machine, its not that hard!!, if you can use a screwdriver then you can take it off. on some machines you have to take the panel on the bottom off but if you can take the back panel off i would do that, from there you should be able to reach the wire. take a look at your machine now, it will only take two seconds to take the panel off with a screwdriver!!
good luck!
this happened to me recently and i thought the washing machine was knackered. my partner had a look in the drum and saw the end of the bra wire sticking through one of the holes in the drum and was able to pull it out.
alternatively you could try taking the rubber seal off from around the front of the drum and see if you can slip your hand in and find it that way.
if not you will have to buy a new wire.
If you can see the wire sticking through one of the holes,use a pair of needle nosed plyers to pull it out.Good Luck! =)
More Related Questions & Answers...